Schlüter®-BARA-RTP | Installation | Schlüter-Systems



  1. To fasten the Schlüter®-BARA-RTP edging profile, drill holes, 8 mm in diameter, into the front edge of the floor covering at approximately 50 cm intervals. To align with the holes provided in the profile, Schlüter®-BARA-RTP can be placed against the front edge and used as a drilling template.
  2. After inserting the anchors, the Schlüter®- BARA-RTP edging profile should be fastened with Schlüter®-BARA-RTPS 540 special bolts. To ensure solid contact of Schlüter®-BARA-RTP to the front edge of the covering assembly, it is advisable to fill the rear ribs of the edging profile with dry-set mortar first.
  3. Once Schlüter®-BARA-RTP has been mounted, the Schlüter®-BARIN gutter system can be attached at the required slope. To do this, fasten the vertically adjustable Schlüter®-BARA-RTP gutter-support profile to the Schlüter®-BARA-RTP edging profile. The Schlüter®-BARA-RTP features slotted holes for establishing the proper slope, if required.
  4. Note: Pre-fabricated corners and connectors are available for internal corners, external corners, and butt joints. The profile ends of Schlüter®-BARA-RTP are to be abutted, leaving an approx. 5 mm wide joint. The joint is covered with the snap-on connector.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit