Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-BARA-RKB

Installation

  1. Apply a contact layer in the edge area where Schlüter®-BARA-RKB is to be installed.
  2. The trapezoid perforated anchoring leg of Schlüter®-BARA-RKB is pressed into the contact layer and aligned. If applicable, the profile has to be cleaned and degreased prior to installation.
  3. Completely cover the trapezoid perforated anchoring leg with bonding material. The finished surface coating should be flush with the upper edge of the profile.

Note: A crack bridging tape such as Schlüter®- KERDI-BAND may be integrated in the coating in the area of the profile. Please note that the drip-lip cannot always prevent the contact of the drainage water with the front edge and the wall area.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit