Schlüter®-BARA-RAP | Installation | Schlüter-Systems



  1. Select Schlüter®-BARA-RW as the carrier profile according to the thickness of the edge area to be covered. The combination of Schlüter®-BARA-RW 30 and Schlüter®- BARA-RAP in the edge area (A) matches the height of the Schlüter®-BARA-RW profiles used on the front side (B), so that the undersides of the profiles form a consistent line around the perimeter (See table 1).
  2. The trapezoid perforated anchoring leg of Schlüter®-BARA-RW as the carrier profile is fully embedded in the dry set mortar at the edge of the screed. Trowel over the anchoring leg to ensure full coverage.
  3. If the Schlüter®-DITRA 25 waterproofing membrane is used for waterproofing and uncoupling, it should abut the edge of the profile. The remaining joint between the Schlüter®-DITRA 25 and the profile is covered with Schlüter®-KERDI-BAND. Use the sealing adhesive Schlüter®- KERDI-COLL or the elastic adhesive Schlüter®-KERDI-FIX to attach the sealing band with an overlap of at least 5 cm on Schlüter®-DITRA 25 and over the angled edge of Schlüter®-BARA-RW, continuing in a vertical direction to just beneath the top edge of the profile.
  4. Schlüter®-BARA-RAP is clipped as a finishing profile onto the Schlüter®- BARA-RW carrier profile and can also be attached with the installation adhesive Schlüter®-KERDI-FIX.
  5. The tiles are installed abutting the finishing leg of the profile, leaving an appropriate joint space to be filled with a flexible sealant.

Tabelle 1:

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit