Schlüter®-BARA-FAP | Function | Schlüter-Systems
logo

Schlüter®-BARA-FAP

Function

Schlüter®-BARA-FAP is a 160 mm high profile with drip-lip made of colour coated aluminium. It is designed to cover the exposed perimeters of cantilevered balconies.

Depending on the properties of the exposed perimeter, the profile can be adhered with the adhesive Schlüter®-KERDI-FIX or attached mechanically.

Schlüter®-BARA-FAP can be combined with all profiles of the Schlüter®-BARA product family and is available in the same colours. We recommend the joint cover Schlüter®-BARASTU as a connector.


Schlüter®-BARA-FAP

Installation

  1. Place the horizontal leg of the product flush on the concrete slab.
  2. Depending on the properties of the exposed perimeter, it can be adhered with the adhesive Schlüter®-KERDI-FIX or attached mechanically.

 

Note: Substrates on which the profile is to be installed need to be evaluated for their stability. Prior to the use of Schlüter®-KERDI-FIX, all components of the surface that may weaken the bond must be removed. If that is not an option, use anchors and screws for additional mechanical attachment. If screw attachment is necessary, position the screws in the top area of the profile. They can then be covered with an edge profile of the Schlüter®-BARA product family. To avoid vibrations in the screw attached option, additional adhesion is recommended in the lower section.


Schlüter®-BARA-FAP

Material

The profile is available in the following material version:
AC = colour coated aluminium

Material properties and areas of application
The profile is made of colour coated aluminium. The coating of the aluminium profile is colour stable as well as UV- and weather resistant. Visible surfaces should be protected against abrasion. In special cases, the suitability of the profile must be verified based on the anticipated chemical and mechanical stresses.


Schlüter®-BARA-FAP

Maintenance

The profile requires no special maintenance or care. The powder coated surface of the aluminium profile is UV resistant and colour stable. Damaged visible surfaces can be restored with paint.


Schlüter®-BARA-FAP

Products


Schlüter®-BARA-FAP/E 90°


Note: We recommend the joint covering Schlüter®-BARA-STU as a connector.

Schlüter®-BARA-FAP  Tables 37098

* to complete the Art.-No., add the colour (e.g. FAP 165 BW).

Colours: 
BW - brilliant white, RAL 9003
GM - grey metallic, RAL 9006
HB - light beige, RAL 1019
PG - pastel grey, no RAL
RB - red brown, RAL 8003
SB - black brown, RAL 8019


Schlüter®-BARA-FAP


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit