Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-BARA-FAP

Installation

  1. Place the horizontal leg of the product flush on the concrete slab.
  2. Depending on the properties of the exposed perimeter, it can be adhered with the adhesive Schlüter®-KERDI-FIX or attached mechanically.

 

Note: Substrates on which the profile is to be installed need to be evaluated for their stability. Prior to the use of Schlüter®-KERDI-FIX, all components of the surface that may weaken the bond must be removed. If that is not an option, use anchors and screws for additional mechanical attachment. If screw attachment is necessary, position the screws in the top area of the profile. They can then be covered with an edge profile of the Schlüter®-BARA product family. To avoid vibrations in the screw attached option, additional adhesion is recommended in the lower section.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit