Schlüter®-BARA-ESOT | Material | Schlüter-Systems



Schlüter®-BARA-ESOT is an angle profile made of 0.8 mm thick stainless steel. Both legs of the profile are perforated. In addition, the vertical leg includes spacer deflections.

Material properties and areas of application:
Schlüter®-BARA-ESOT is used in the absence of a load-bearing substrate for the base tile, e.g., over waterproofing membranes which carry up the wall, or in cases where the skirting will not be bonded to the wall. Floor structures laid over waterproofing membranes must include the Schlüter®-TROBA-PLUS drainage system so that water does not collect at or behind the skirting. Skirtings laid on Schlüter®-BARA-ESOT will absorb normal impacts caused by brooms or mops.

In special cases, the suitability of a proposed type of profile must be verified based on the anticipated chemical, mechanical, and/or other stresses.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit