Balcony finishing profiles

The edges of balconies and terraces are consistently exposed to the weather. Schlüter®-BARA edge profiles combine neat appearance with effective protection of these areas. In just a few steps, the corresponding profiles can be attached to the gutter system Schlüter®-BARIN.

Schlüter®-BARA-RKK / -RKKE

Schlüter®-BARA-RKK/-RKKE are T shaped finishing profiles with a short overhang drip edge for installation over finished sloped screeds.
Read more

Schlüter®-BARA-HV

Schlüter®-BARA-HV is an adhesive tape of polyethylene with anchoring fleece on the front side and a self adhesive butyl coating on the backside. It is suitable for creating an adhesive flange for reliable waterproof connections between the bonded waterproofing assembly Schlüter®-KERDI and the edge of a Schlüter®- BARA-RKL profile.
Read more

Schlüter®-BARA-FAP

Schlüter®-BARA-FAP is a profile for covering the front edges of cantilevered balconies.
Read more

Schlüter®-BARA-ESOT

Schlüter®-BARA-ESOT is a skirting support profile made of stainless steel, which is used in applications where there is no load bearing substrate available for the skirting tiles.
Read more

Schlüter®-BARA-RAK

Schlüter®-BARA-RAK is a colour coated aluminium balcony edging profile with a drip edge. It is fitted to the edges of finished inclined surfaces to form both an edging and a drip edge.
Read more

Schlüter®-BARA-RAKE/-RAKEG

Schlüter®-BARA-RAKE/-RAKEG is a finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. Schlüter®-BARARAKE is especially suited for assemblies with the bonded drainage mat Schlüter®- DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Read more

Schlüter®-BARA-RAP

Schlüter®-BARA-RAP is a finishing profile of stainless steel or colour coated aluminium. It is used in conjunction with the carrier profile Schlüter®-BARA-RW to cover the exposed (lateral) edges of balconies and terraces.
Read more

Schlüter®-BARA-RK

Schlüter®-BARA-RK is a T shaped finishing profile. The front section features an overhanging drip edge which covers the Schlüter®- TROBA sub surface drainage layer.
Read more

Schlüter®-BARA-RKB

Schlüter®-BARA-RKB is a T shaped finishing profile for coatings. The front finishing leg has a protruding drip lip.
Read more

Schlüter®-BARA-RKL/-RKLT

Schlüter®-BARA-RKL and Schlüter®-BARA-RKLT are angled edge profiles with drainage holes made of colour coated aluminium. They are especially suited for large format pavers, which are either installed loosely over gravel/crushed stone or pedestal constructions.
Read more

Schlüter®-BARA-RT

Schlüter®-BARA-RT is a T shaped finishing profile of colour coated aluminium for covering exposed edges of balconies and terraces. The top leg covers the edge of the assembly while the lower leg forms a drip edge and hides the joint with the Schlüter®-TROBA area drainage mat.
Read more

Schlüter®-BARA-RTK

Schlüter®-BARA-RTK is an edging profile with a drip edge for floor assemblies that have an existing sloped screed. The profile features a T shaped chamber for attaching the Schlüter®- BARIN gutter system. Tiles may also be installed with an overhang. As an alternative, a Schlüter®- JOLLY profile can be installed over the grooved transition to the drip lip to protect the edge of the tile.
Read more

Schlüter®-BARA-RTKE/-RTKEG

Schlüter®-BARA-RTKE is an edging profile with drip edge for floor assemblies that have an existing sloped screed. The profile features a T shaped chamber for attaching the Schlüter®-BARIN gutter system. Schlüter®-BARA-RTKE is especially suited for assemblies with the bonded drainage mat Schlüter®- DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Read more

Schlüter®-BARA-RTP

Schlüter®-BARA-RTP is an edging profile for attaching the Schlüter®-BARIN gutter system, which can be retrofitted to the exposed edges of existing balcony and terrace structures.
Read more

Schlüter®-BARA-RW

Schlüter®-BARA-RW is an angular profile of stainless steel or colour coated aluminium for finishing the exposed perimeters of balconies and terraces.
Read more

Schlüter®-BARA-RWL

Schlüter®-BARA-RWL is an edging profile with drainage holes, made of colour coated aluminium for use on balconies and terraces. It is particularly suitable for finishing coverings on balconies and terraces that are set directly onto a gravel layer or pedestals.
Read more