Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo
Schlüter®-DITRA 25

Schlüter®-DITRA 25

Schlüter®-DITRA 25 is a polyethylene mat with square, dovetailed recesses and an anchoring fleece laminated to the underside. In conjunction with tiled coverings, Schlüter®-DITRA 25 forms an uncoupling, waterproofing and vapour pressure equalisation layer.
Read more

Schlüter®-DITRA-DRAIN

Schlüter®-DITRA-DRAIN

Schlüter®-DITRA-DRAIN is a safe and permanently effective passive capillary drainage system for floor assemblies. The material is installed in exterior areas into thin bed adhesive over a sloped waterproofing assembly, such as Schlüter®-KERDI or other suitable proprietary waterproofing systems.
Read more

Schlüter®-DITRA-HEAT

Schlüter®-DITRA-HEAT

Schlüter®-DITRA-HEAT is a polypropylene membrane with a cut back stud structure and an anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as an uncoupling layer, bonded waterproofing and moisture vapour barrier and is designed for the attachment of the matching heating cables of the system for floor heating.
Read more

Schlüter®-DILEX-BWB

Schlüter®-DILEX-BWB

Schlüter®-DILEX-BWB is a movement joint profile with side sections of rigid, recycled plastic. The top movement zone is made of soft CPE and creates the 10 mm wide visual surface.
Read more

Schlüter®-DILEX-BWS

Schlüter®-DILEX-BWS

Schlüter®-DILEX-BWS is a movement joint profile with side sections of rigid, recycled plastic.The movement zone consists of soft CPE and creates the 5 mm wide visual surface.
Read more

Schlüter®-DILEX-KS/-KSA/-EKSB

Schlüter®-DILEX-KS/-KSA/-EKSB

Schlüter®-DILEX-KS is a movement profile with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber. Schlüter®-DILEX-KSA is a connection profile with edge protection. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window frames. Schlüter®-DILEX-EKSB is a movement profile with edge protection for floor coatings and other thin floor coverings. It consists of lateral stainless steel anchoring legs that are connected to a fixed elastic insert of soft synthetic material.
Read more

Schlüter®-DILEX-EDP

Schlüter®-DILEX-EDP

Schlüter®-DILEX-EDP is a stainless steel movement profile, which allows horizontal movement through a tongue and groove connection.
Read more

Schlüter®-DILEX-AKWS

Schlüter®-DILEX-AKWS

Schlüter®-DILEX-AKWS is a movement profile with aluminium side anchoring legs connected to a soft PVC movement zone.
Read more

Schlüter®-DILEX-EK/-RF

Schlüter®-DILEX-EK/-RF

Schlüter®-DILEX-EK is a two part corner profile made of recycled, rigid PVC and soft CPE with a tongue and groove connection and an integrated joint chamber for durable, flexible and maintenance free perimeter joints between floors and walls or floors and skirtings.
Read more

Schlüter®-DILEX-BWA

Schlüter®-DILEX-BWA

Schlüter®-DILEX-BWA provides a flexible connection between tiled surfaces and existing coverings or structures, such as door and window frames.
Read more

Schlüter®-DILEX-AS

Schlüter®-DILEX-AS

Schlüter®-DILEX-AS is a joining profile for creating flexible joints to fixtures such as shower trays, baths, door and window frames.
Read more

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image

Write To Us!

Do you have a question or suggestion?