Schlüter-DITRA-SOUND - Schlüter-Systems
 











 
Schlüter®-DITRA-SOUND




MATERIAL

Schlüter-DITRA-SOUND is a heavy polyethylene mat with a thickness of approximately 3.5 mm. A fl eece fabric is laminated on both sides of the mat. Polyethylene is not UV stable in the long term so the product should not be stored in places with prolonged exposure to direct sunlight.

Material Properties and Areas of Application:
Schlüter-DITRA-SOUND does not rot, is waterproof and crack bridging. Furthermore, it is largely resistant to the effects of watery solutions, salts, acids and alkalis, many organic solvents, alcohols and oils. The suitability of the material must be verifi ed based on the specifi c chemical stresses, including the anticipated concentration, temperature and length of exposure. The water vapour permeability of the material is relatively low. The material is physiologically harmless. Schlüter-DITRA-SOUND can be used in a wide range of different applications. In special cases, the suitability of the material must be verifi ed based on the anticipated chemical and mechanical stresses. The information provided below is intended as a general guideline. In conjunction with Schlüter-KERDI, Schlüter-DITRA-SOUND provides a waterproof assembly for ceramic tile and natural stone applications.

Note
The thin-bed mortar and covering materials used in conjunction with Schlüter-DITRA-SOUND must be suitable for their respective applications and meet the relevant requirements. The use of quick setting thin-bed mortars may be an advantage for specific projects. It is recommended to use walking boards or other protective coverings if material must be transported over areas where Schlüter-DITRA-SOUND has already been installed.


   
How you got here