Schlüter-TREP-S/-B - Schlüter-Systems
 











 
Schlüter®-TREP-S/-B
Installation
  1. Select Schlüter-TREP-SE / -S / -B according to tile thickness.
  2. First, install riser tile to the appropriate height.
  3. Apply appropriate tile adhesive to the edge areas above the riser.
  4. Fill cavities at the bottom of the profile with appropriate tile adhesive.
    Note to points 3 and 4:
    With respect to thicker layers of adhesive in the edge area, use an appropriate dry set or medium set mortar.
  5. Press Schlüter-TREP-SE / -S / -B completely into the tile adhesive and align in such a way that the front edge of the support section is flush with the riser tile.
  6. Trowel additional adhesive over the trapezoid perforated anchoring leg and the stair tread surface.
  7. Solidly embed the tread tiles so that the top of the profile is flush with the tile. Full coverage must be obtained at the profile area.
  8. A joint of approximately 2 - 3 mm should be left between the tile and the profile.
  9. Fill the joint completely with grout.
  10. The front edge cover profile Schlüter-TREP-TAP can only be used in conjunction with Schlüter-TREP-S / -B that have aluminum support profiles. The profile is either inserted laterally through the designated groove or snapped into place from below.
    Attach the back of Schlüter-TREP-TAP to the riser (e.g. with Schlüter-KERDI-FIX).

 

   
How you got here
References
Commonwealth Games Pool