 |
|
|
 |
|
 |
 
    |
    |
|
|
|
|
|
|
|
| |
INSTALLATION
- Select Schlüter-DECO according to tile thickness.
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering, or where a decorative joint is desired.
- Press the perforated anchoring leg of the Schlüter-DECO into the tile adhesive and align.
- Ensure that the trapezoid perforated anchoring legs are completely embedded in the tile adhesive and that all cavities are filled.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower).
- A joint of approx. 2 mm - 3 mm should be left between the tile and the profile.
- Fill the joint completely with grout.
|
|
|
|
|
|
|
|
|
Schlüter®-DECO
