 Balcony Finishing Profiles And Gutter Systems
Balcony Finishing Profiles And Gutter Systems
|
 |
|
Schlüter®-BARA-ESOT
Schlüter-BARA-ESOT is a skirting support profile made of stainless steel, which is used in applications where there is no load bearing substrate available for the skirting tiles.
|
|
|
|
 |
|
Schlüter®-BARA-RW
Schlüter-BARA-RW is an angular profile of stainless steel or colour coated aluminium for finishing the exposed perimeters of balconies and terraces.
|
|
|
|
 |
|
Schlüter®-BARA-R
Schlüter-BARA-R is a T-shaped edging profile made of coloured aluminium for the exposed perimeters of balconies and terraces.
|
|
|
|
 |
|
Schlüter®-BARA-RK
Schlüter-BARA-RK is a T-shaped finishing profile. The front section features an overhangingdrip edge which covers the Schlüter-TROBA sub surface drainage layer.
|
|
|
|
 |
|
Schlüter®-BARA-RAK
Schlüter-BARA-RAK is a colour coated aluminium balcony edging profile with a drip edge. It is fitted to the edges of finished inclined surfaces to form both an edging and a drip lip.
|
|
|
|
 |
|
Schlüter®-BARA-RAM
Schlüter-BARA-RAM is a colour coated aluminium edging profile with a drip lip for balconies and terraces. The profile is installed during application of the sloped screed, for which it can be used as a screeding guide.
|
|
|
|
 |
|
Schlüter®-BARA-RTKE/-RTKEG
Schlüter-BARA-RTKE/-RTKEG is a finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds.
|
|
|
|
 |
|
Schlüter®-BARA-RTK
Schlüter-BARA-RTK is an edging profile with a drip edge for floor assemblies that have an existing sloped screed. The profile features a T shaped chamber for attaching the Schlüter-BARIN gutter system. The recessed transition to the drip edge allows the setting of Schlüter-RONDEC or Schlüter-JOLLY as a finishing profile for the tile edge. However, the tiles can also be set to overhang the Schlüter-BARA profile.
|
|
|
|
 |
|
Schlüter®-BARA-RTP
Schlüter-BARA-RTP is an edging profile for attaching the Schlüter-BARIN gutter system, which can be retrofitted to the exposed edges of existing balcony and terrace structures.
|
|
|
|
 |
|
Schlüter®-BARA-RWL
Schlüter-BARA-RWL is an edging profile with drainage holes, made of colour coated aluminium for use on balconies and terraces. It is particularly suitable for finishing coverings on balconies and terraces that are set directly onto a gravel layer or pedestals.
|
|
|
|
 |
|
Schlüter®-BARA-RAP
Schlüter-BARA-RAP is a finishing profile of colour coated aluminium. It is used in conjunction with the carrier profile Schlüter-BARA-RW to cover the exposed (lateral) edges of balconies and terraces.
|
|
|
|
 |
|
Schlüter®-BARA-RKB
Schlüter-BARA-RKB is a T-shaped finishing profile for coatings. The front finishing leg has a protruding drip lip.
|
|
|
|
 |
|
Schlüter®-BARA-RT
Schlüter-BARA-RT is a T-shaped finishing profile of colour coated aluminium for covering exposed edges of balconies and terraces. The top leg covers the edge of the assembly while the lower leg forms a drip lip and hides the joint with the Schlüter-TROBA area drainage mat.
|
|
|
|
 |
|
Schlüter®-BARA-RKL/-RKLT
Schlüter-BARA-RKL is an angled edge profile with drainage holes made of colour coated aluminium. It is especially suited for large format pavers, which are either installed loosely over gravel/crushed stone or pedestal constructions.
Schlüter-BARA-RKLT is an angled edge profile with drainage holes made of colour coated aluminium. It is especially suited for large format pavers, which are either installed loosely over gravel/crushed stone or pedestal constructions. Schlüter-BARA-RKLT features a T-shaped profile chamber for attachment of the gutter system Schlüter-BARIN.
|
|
|
|
 |
|
Schlüter®-BARA-RAKE/-RAKEG
Schlüter-BARA-RAKE is an edging profile with drip edge for floor assemblies that have an existing sloped screed. Schlüter-BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter-DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Schlüter-BARA-RAKEG is a finishing profile with drip lip for installation over finished sloped screeds. It was especially designed for use with the bonded uncoupling membrane Schlüter-DITRA. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
|
|
|
|
