Schlüter-KERDI-SHOWER

Schlüter-KERDI-SHOWER is a modular system for the construction of floor level showers with ceramic tiles. The sloped boards are available in four different sizes and can be combined with waterproofing sets for wall and floor drains, with optional use of base levelling panels. The base dimensions are
  • 90 x 90 cm
  • 100 x 100 cm
  • 120 x 120 cm
  • 150 x 150 cm

The floor elements can easily be adapted for the construction of circular shower designs due to precut grooves. Schlüter-KERDI-SHOWER modules stand out for their particularly easy and reliable installation.els.




Schlüter-KERDI-SHOWER

  • Safe and easy installation
    The drain remains accessible during installation to the drain pipe, which allows for safe and easy installation and leak testing. The Schlüter-KERDI-SHOWER boards are sloped at the required angle. The proven Schlüter-KERDI-DRAIN insert with bonding flange guarantees a secure connection to the waterproofing assembly. The grate assembly is height adjustable from 3 to 15 mm, which makes it ideally suited for the material thicknesses of covering materials such as glass mosaics, natural stone, ceramics, or other coatings. Schlüter-KERDI-SHOWER boards can be used for angular and round showers, no special boards are necessary.
  • Very low construction height
    The height of the levelling board is 60 mm, while the height of the sloped board (depending on the size) is 31– 39 mm. Without the covering, a total height of less than 100 mm is possible. Low construction height and easy cleaning, due to the inclusion of the odour trap in the grate frame. In case of vertical drain connections directly through the load bearing substrate, the levelling board is not needed. In this case, the construction height is even less (31– 39 mm plus covering material).
  • Available sizes
  • 90 x 90 cm
  • 100 x 100 cm
  • 120 x 120 cm
  • 150 x 150 cm



Schlüter-KERDI-SHOWER-T

Schlüter-KERDI-SHOWER-T is a sloped (greater than 2%) substrate board for the direct installation of tiles in floor level showers. It is designed to accommodate the floor drain Schlüter-KERDI-DRAIN-BASE. For ease of transport and handling, it is composed of two parts that simply interlock together. A waterproofing Schlüter-KERDI collar that covers the entire component is included in the set.


Schlüter-KERDI-SHOWER-TC

Schlüter-KERDI-SHOWER-TC is a sloped (greater than 2%) substrate board for the direct installation of tiles in floor level showers. It is designed to accommodate the floor drain Schlüter-KERDI-DRAIN-BASE and is used in combination with base levelling component to accommodate the drain body and the drainage pipe. For ease of transport and handling, it is composed of two parts that simply interlock together. A waterproofing Schlüter-KERDI collar that covers the entire component is included in the set.


Schlüter-KERDI-SHOWER-SK

Schlüter-KERDI-SHOWER-SK is a waterproofing set for floor level showers. It includes Schlüter-KERDI for waterproofing the wall areas of showers as well as the corresponding prefabricated parts for interior corners and pipe sleeves. The set also includes Schlüter-KERDI-KEBA sealing band for waterproofing the abutting joints of the membranes and floor to wall transitions, a Schlüter-KERDI-DRAIN-BASE floor drain, and Schlüter-KERDI-COLL sealing adhesive for waterproofing the sealing bands and prefabricated parts. Schlüter-KERDI-SHOWER-SK is suitable for conventional floor level showers and for combination with the floor elements Schlüter-KERDI-SHOWER-T/-TC.


Schlüter-KERDI-DRAIN-BASE

Schlüter-KERDI-DRAIN-BASE is an especially low floor drain that is suitable for the installation of conventional barrier free shower designs or for combination with Schlüter-KERDI-SHOWER floor elements. The odour trap is integrated into the grate assembly and is height adjustable to match tiles or coverings with a thickness of 3 mm to 15 mm. The minimum construction height is just 70 mm for coverings with thicknesses over 6 mm (75 mm for coverings ≤ 6 mm, and the drain capacity is 0.4 litres per second. The drain is horizontally arranged with a diameter of DN 40 mm and comes with an adaptor to BS 40 mm. Schlüter-KERDI-DRAIN-BASE is available with a standard stainless steel grate or with a stainless steel grate in a special design.

   
How you got here